MVCI Driver for Toyota-Cable 2.0.1 15: A Complete Guide
MVCI Driver for Toyota-Cable 2.0.1 15: A Complete Guide
If you own a Toyota vehicle and want to diagnose and program it using your PC, you will need a special tool called MVCI (Mini Vehicle Communication Interface). This tool allows you to connect your Toyota vehicle with your PC via a USB cable and use the Techstream software to access various functions and features of your vehicle.
mvci driver for toyota-cable 2.0.1 15
However, to use the MVCI tool, you will also need to install the MVCI driver for Toyota-Cable 2.0.1 15 on your PC. This driver is essential for the communication between your PC and your vehicle. Without it, the Techstream software will not recognize your MVCI device and you will not be able to perform any diagnostic or programming tasks.
In this article, we will show you how to install and activate the MVCI driver for Toyota-Cable 2.0.1 15 on Windows 7 and Windows 10 64-bit systems. We will also explain what the MVCI driver is and why you need it.
What is MVCI Driver for Toyota-Cable 2.0.1 15?
The MVCI driver for Toyota-Cable 2.0.1 15 is a software component that enables the communication between your PC and your Toyota vehicle via the MVCI device and the USB cable. The driver is compatible with the Techstream software version 14.20.019 or higher, which is the official diagnostic and programming software for Toyota vehicles.
The driver supports the J2534 protocol, which is a standard for vehicle communication interfaces. The driver allows your PC to send and receive data from your vehicle's electronic control units (ECUs) using the Techstream software. The driver also enables you to update the firmware of your MVCI device if needed.
The MVCI driver for Toyota-Cable 2.0.1 15 is designed for Windows 7 and Windows 10 64-bit systems. It can be installed from a CD that comes with your MVCI device or downloaded from online sources.
Why You Need MVCI Driver for Toyota-Cable 2.0.1 15?
You need the MVCI driver for Toyota-Cable 2.0.1 15 if you want to use your PC to diagnose and program your Toyota vehicle using the Techstream software and the MVCI device. The driver is necessary for the following reasons:
It allows your PC to recognize your MVCI device and establish a connection with your vehicle.
It enables your PC to communicate with your vehicle's ECUs using the J2534 protocol.
It allows you to access various functions and features of your vehicle using the Techstream software, such as reading and clearing trouble codes, viewing live data, performing active tests, calibrating sensors, programming keys, etc.
It allows you to update the firmware of your MVCI device if needed.
Without the MVCI driver for Toyota-Cable 2.0.1 15, you will not be able to use your PC and your MVCI device to diagnose and program your Toyota vehicle.
How to Install MVCI Driver for Toyota-Cable 2.0.1 15 on Windows 7?
To install the MVCI driver for Toyota-Cable 2.0.1 15 on Windows 7, you will need to follow these steps:
Insert the CD that comes with your MVCI device into your PC's CD drive or download the driver from online sources.
Open the folder that contains the driver files and run the setup.exe file.
Select your preferred language and follow the instructions on the screen to install the driver.
When prompted, connect your MVCI device to your PC via the USB cable and wait for Windows to detect it and install the driver automatically.
Open the Techstream software on your desktop and select Setup -> VIM -> Select interface as Xhorse MVCI and click OK.
To activate the Techstream software, open the Readme file in the folder that contains the driver files and copy the activation key.
Right-click on the Techstream icon on your desktop and go to Properties -> Shortcut -> Target and replace "C:/Program Files/Toyota Diagnostics/Techstream/bin/MainMenu.exe" by "C:/Program Files/Toyota Diagnostics/Techstream/bin/Techstream.exe"/395070/VM:1". Then click Apply and OK.
Run the Techstream software on your desktop and enter the activation key when asked.
You have successfully installed and activated the MVCI driver for Toyota-Cable 2.0.1 15 on Windows 7.
How to Install MVCI Driver for Toyota-Cable 2.0.1 15 on Windows 10 64-bit?
To install the MVCI driver for Toyota-Cable 2.0.1 15 on Windows 10 64-bit, you will need to follow these steps:
Insert the CD that comes with your MVCI device into your PC's CD drive or download the driver from online sources.
Create some new folders under C:/Program Files (x86) folder as follows: C:/Program Files (x86)/XHorse Electronics then C:/Program Files (x86)/XHorse Electronics/MVCI Driver for TOYOTA TIS
Copy the files FirmwareUpdateTool.exe and MVCI32.dll from the folder that contains the driver files to C:/Program Files (x86)/XHorse Electronics/MVCI Driver for TOYOTA TIS folder.
Under C:/Program Files (x86)/XHorse Electronics/MVCI Driver for TOYOTA TIS/ftdibus folder, right-click on ftdibus.inf file and click Install, then accept any warnings that appear.
Under C:/Program Files (x86)/XHorse Electronics/MVCI Driver for TOYOTA TIS/ftdiport folder, right-click on ftdiport.inf file and click Install, then accept any warnings that appear.
Connect your MVCI device to your PC via the USB cable and wait for Windows to detect it and install
the driver automatically.
If Windows does not install
the driver automatically or installs
the wrong version of
the driver, go to Device Manager -> Ports (COM & LPT) -> USB Serial Port (COMx) -> Properties -> Driver -> Update Driver -> Browse my computer for drivers -> Let me pick from a list of available drivers on my computer -> Have Disk -> Browse -> Select ftdibus.inf file from C:/Program Files (x86)/XHorse Electronics/MVCI Driver for TOYOTA TIS/ftdibus folder -> OK -> Next -> Finish
Repeat step 7 for USB Serial Converter under Universal Serial Bus controllers in Device Manager.
The correct version of
the driver should be
2.6.0.0 as shown in Device Manager.
Open
the Techstream software on
your desktop and select Setup -> VIM -> Select interface as Xhorse MVCI
and click OK.
To activate
the Techstream software, open
the Readme file in
the folder that contains
the driver files
and copy
the activation key.
Right-click on
the Techstream icon on
your desktop
and go to Properties -> Shortcut -> Target
and replace "C:/Program Files/Toyota Diagnostics/Techstream/bin/MainMenu.exe" by "C:/Program Files/Toyota Diagnostics/Techstream/bin/Techstream.exe"/395070/VM:1". Then click Apply
and OK.
Run
the Techstream software on
your desktop
and enter
the activation key when asked.
You have successfully installed
and activated
the MVCI driver for Toyota-Cable 2.0.1 15 on Windows 10 64-bit.
How to Use MVCI Driver for Toyota-Cable 2.0.1 15 with Techstream Software?
After installing and activating the MVCI driver for Toyota-Cable 2.0.1 15 on your PC, you can use it with the Techstream software to diagnose and program your Toyota vehicle. Here are some steps to follow:
Connect your MVCI device to your PC via the USB cable and make sure the driver is installed correctly.
Connect your MVCI device to your vehicle's OBD-II port using the OBD-II cable.
Turn on the ignition of your vehicle and make sure it is in the ON position.
Run the Techstream software on your PC and select Connect to Vehicle.
Select your vehicle's model, year, engine and system from the menu and click Next.
The software will scan your vehicle's ECUs and display the available functions and features.
You can select any function or feature you want to access, such as Health Check, Customization, Utility, etc.
You can also select any ECU you want to communicate with, such as Engine, ABS, Airbag, etc.
You can perform various tasks using the Techstream software, such as reading and clearing trouble codes, viewing live data, performing active tests, calibrating sensors, programming keys, etc.
When you are done, you can disconnect your MVCI device from your vehicle and your PC.
What are the Benefits of Using MVCI Driver for Toyota-Cable 2.0.1 15?
Using the MVCI driver for Toyota-Cable 2.0.1 15 with the Techstream software has many benefits for Toyota owners and technicians. Some of them are:
It allows you to diagnose and program your Toyota vehicle using your own PC without going to a dealer or a mechanic.
It saves you time and money by avoiding unnecessary trips to the dealer or a mechanic.
It gives you access to various functions and features of your vehicle that are not available with other tools or devices.
It allows you to customize your vehicle's settings according to your preferences and needs.
It helps you troubleshoot and fix any problems or issues with your vehicle's performance or functionality.
It enhances your vehicle's safety and reliability by keeping it updated with the latest firmware and software.
What are the Limitations of Using MVCI Driver for Toyota-Cable 2.0.1 15?
While using the MVCI driver for Toyota-Cable 2.0.1 15 with the Techstream software has many benefits, it also has some limitations that you should be aware of. Some of them are:
It requires a compatible PC with Windows 7 or Windows 10 64-bit system and enough memory and disk space.
It requires a compatible MVCI device with firmware version 1.4.1 or higher and a USB cable.
It requires a compatible Techstream software version 14.20.019 or higher and an activation key.
It may not work with some Toyota models or systems that are not supported by the Techstream software.
It may not work with some third-party devices or software that interfere with the communication between your PC and your vehicle.
It may cause some errors or malfunctions if not used properly or carefully.
Conclusion
The MVCI driver for Toyota-Cable 2.0.1 15 is a software component that enables the communication between your PC and your Toyota vehicle via the MVCI device and the USB cable. It allows you to use the Techstream software to access various functions and features of your vehicle, such as reading and clearing trouble codes, viewing live data, performing active tests, calibrating sensors, programming keys, etc. It also allows you to update the firmware of your MVCI device if needed.
The MVCI driver for Toyota-Cable 2.0.1 15 is designed for Windows 7 and Windows 10 64-bit systems. It can be installed from a CD that comes with your MVCI device or downloaded from online sources. It requires a compatible PC, MVCI device, Techstream software and activation key to work properly.
The MVCI driver for Toyota-Cable 2.0.1 15 has many benefits for Toyota owners and technicians, such as saving time and money, customizing vehicle settings, troubleshooting and fixing problems, enhancing safety and reliability, etc. It also has some limitations that should be considered before using it, such as compatibility issues, system requirements, potential errors or malfunctions, etc.
If you want to use your PC to diagnose and program your Toyota vehicle using the Techstream software and the MVCI device, you will need to install and activate the MVCI driver for Toyota-Cable 2.0.1 15 on your PC first. This article has provided you with a complete guide on how to do that step by step. We hope you find it useful and informative. b99f773239
https://www.storkready.com/group/the-first-year/discussion/2a4533b4-33b8-433a-be3c-98785737eb30
https://www.gobreezy.com/group/gobreezy-group/discussion/ce20b5f4-5290-49ae-bd44-ef0c7616c5fb